Flooring and epoxy7 of 13Tessera Floors & Coatings and every price are fictional.

For Chris Navarro, Gilbert, Arizona

A garage floor that cleans up in minutes and looks like part of the house.

Project
Garage floor coating
3 options from
$3,612
Floor areas
688 sq ft
Valid until
December 14, 2026
Prepared by
Dee Alvarado, project manager

An illustration of the selected color and finish on a garage floor. Real flake distribution and color vary with light and batch.

Chris, thanks for showing me the garage on Monday.

Below are three coating systems priced per square foot for the garage bays and the steps into the house, with the covered back patio as an option. Choose a color or flake blend, the sheen and topcoat, and any extras, and the total updates as you go.

Sending a request doesn't commit you to anything. I'll bring cured sample boards so you can see the colors in your garage light.

Dee AlvaradoProject manager, Tessera Floors & Coatings

The process

Every system starts with the same preparation: we diamond-grind the concrete to open its surface, repair cracks and pits, and vacuum it clean, because a coating is only as good as the surface under it. The systems differ in what goes on top: a solid color, a full broadcast of decorative flake, or a hand-worked metallic finish.

Your floor areas

Square footage from our site measure. Include the optional areas if you'd like them coated too.

Floor areas, measured in sq ft
Floor areaSq ftIn this price
Three-car garage floor640Always
Steps and landing into the house48Always
Covered back patioOutdoor slab under the patio roof.220
Total measured688 sq ft
Three-car garage floor640 sq ftSteps and landing48 sq ftCovered back patio220 sq ft, not includedBlocks are sized by area. Not a floor plan, not to scale.

Sample measurements for this demonstration from a site measure. A real estimate uses your floor's measured areas.

Choose a coating system

Prices are per square foot, multiplied by the areas you include. Color and topcoat come next.

Package comparison. Prices are exact for the scope listed.
Solid color epoxy$3,612$5.25 per sq ft2 days on siteFull-flake polyasparticRecommended$5,091.20$7.40 per sq ft2 days on siteMetallic epoxy$7,430.40$10.80 per sq ft3 days on site
OverviewA 100% solids epoxy base coat in a solid color with a clear polyaspartic topcoat.A full broadcast of vinyl flake over the base coat, sealed with a polyaspartic topcoat.A hand-worked metallic epoxy with movement and depth, sealed with a polyaspartic topcoat.
LookOne solid colorSpeckled flake blendSwirled metallic depth
Hides dust and marksLeastMostModerate
TextureSmoothLight orange-peelSmooth
Back to normal useWalk in 1 day, park in 3Walk in 1 day, park in 3Walk in 1 day, park in 4
Time on site2 days2 days3 days
Not in this packageOnly the general exclusionsOnly the general exclusions
  • Flake

Full-flake polyasparticRecommended

$5,091.20$7.40 per sq ft

A full broadcast of vinyl flake over the base coat, sealed with a polyaspartic topcoat.

Look
Speckled flake blend
Hides dust and marks
Most
Texture
Light orange-peel
Back to normal use
Walk in 1 day, park in 3
Time on site
2 days

2 days on site

Dee recommends Full-flake polyaspartic. Full flake hides dust and tire marks better than a solid color, and the same system works on the covered patio if you add it.

Color, sheen and topcoat

Full-flake polyaspartic includes the options marked Included. Flake and color chips are illustrations. We'll bring cured sample boards before we start.

Color or flake blendGravel blend

Chips are illustrations; we bring cured sample boards before we start.

Gravel blend. Gray, black and white flake.

SheenGloss

How much the floor reflects.

Gloss. A bright reflective finish.

TopcoatPolyaspartic topcoat

The clear protective layer you walk on.

Polyaspartic topcoat. One clear UV-stable coat.

Preparation and extras

Optional. Nothing here is added unless you choose it.

What’s included

In every system

  • Moisture test of the slab before coating
  • Diamond grinding of every coated area
  • Crack and pit repair up to 20 linear ft (more is priced under Only if needed)
  • Base coat, color or flake, and topcoat as chosen
  • Protection of walls and doors during work
  • Clean-up and disposal of dust and debris

Not included

  • Moving stored items out of the garage
  • Repair of structural slab movement
  • Coating of walls or stem walls unless added

This price assumes

  • The garage is empty and vehicles are out for 3 days
  • Power and water are available on site
  • The slab passes the moisture test, or you approve the primer listed below

Who handles what

Who handles each part of the project
ItemHandled byDetails
Emptying the garageEverything off the floor, including shelving that sits on it.YouEverything off the floor, including shelving that sits on it.
Vehicles outFor 3 days (4 for metallic).YouFor 3 days (4 for metallic).
Moisture testWe test and share the result before coating.Tessera Floors & CoatingsWe test and share the result before coating.
Power and waterAccess to an outlet and a hose bib.YouAccess to an outlet and a hose bib.

Only if needed

These aren't in your total. They apply only if the condition is found, and we'll show you before doing the work.

Crack repair beyond the first 20 ftOnly if found during grinding. We'll mark and measure them with you.
$8 per linear ft
Deep spall or pit repairOnly for damage deeper than a quarter inch.
$35 per sq ft

How the project runs

Start: Usually 1 to 2 weeks after you approve.

  1. Moisture testBefore day 1

    We test the slab and share the result.

  2. Grind and repairDay 1

    Diamond grinding, crack and pit repair, and a full vacuum.

  3. Base coat and colorDay 1 to 2

    Base coat, then color, flake broadcast or metallic layer.

  4. TopcoatDay 2 to 3

    Excess flake is scraped and the clear topcoat goes on.

  5. Cure1 to 4 days

    Walk on it the next day; park after 3 days (4 for metallic).

Durations are Tessera Floors & Coatings’s estimates and can shift with weather and inspections.

About Tessera Floors & Coatings

Tessera Floors & Coatings is a fictional floor coating company created to demonstrate QuoteStage. In a real estimate, this is where the contractor describes who they are, how long they've worked in the area and how they run a project.

License
Specialty contractor license ROC-DEMO-0000 (fictional number for demonstration)
Insurance
General liability certificate available on request (demonstration text)
Warranty
Sample warranty for the fictional demo company: 5-year warranty against peeling and hot-tire lifting on garage floors we prepare and coat. It doesn't cover impacts, chemicals left standing, or moisture conditions found in testing and declined.
Service area
Maricopa County, Arizona

Documents

As Tessera Floors & Coatings provided them.

Terms

Prices valid until
December 14, 2026
Payment schedule
  1. 20% deposit to schedule
  2. 80% on completion
Changes after signing
If testing shows a condition that changes the system, we'll show you the result and the price before continuing.
Please note

Square footage comes from our site measure. Care: sweep regularly, clean with a pH-neutral cleaner, and wipe up oil, brake fluid and harsh chemicals promptly.

Ready to go ahead?

Send your selections to Tessera Floors & Coatings. They'll contact you to confirm the details and prepare an agreement. Sending this doesn't commit you to anything.

You’re sending$5,513.77

Full-flake polyaspartic package; Color or flake blend: Gravel blend; Sheen: Gloss; Topcoat: Polyaspartic topcoat.

Best way to reach you

Demonstration page: the form works, but nothing is sent or stored.

Make estimates like this from the ones you already write

Drop in one you’ve already sent. In about a minute it looks like this one, with your prices, your options and your terms. You see it before you make an account.

Upgrade your estimateQuoteStage home
Full-flake polyasparticTotal $5,513.77

Your selection

Your selection

Itemized price
Full-flake polyaspartic$7.40 × 688 sq ft$5,091.20
Gravel blendColor or flake blendIncluded
GlossSheenIncluded
Polyaspartic topcoatTopcoatIncluded
Subtotal$5,091.20
Sales tax (sample rate, 8.3%)$422.57
Total$5,513.77

Prices valid until December 14, 2026.

A request isn’t a contract or a payment. Tessera Floors & Coatings will contact you to confirm details first.